Back to login
Honda Pilot
Model Overview
The Pilot is Honda's offering in the mid-size, three-row crossover category. Like most Honda products, the Pilot is among the more entertaining cars to drive in its class thanks to powertrain and chassis tunings that makes it feel smaller than it is. But that doesn't come at the expense of comfort or space: Pilot's third row is one of the roomiest in the segment.
Photos
Reviews and News
Owner Scores
Comfort
9
Performance
9
Fuel Economy
8
Interior Design
9
Exterior Styling
9
Reliability
10
Owner Reviews
Peter4525
Excellent family car with low maintenance
June 19, 2018
EXL-RES
Overall Score
Excellent family car with 8 passengers. Low maintenance cost and great mileage on highways. Great comfort. tons of safety features includes Collision Mitigation, Lane Departure Assist, Adaptive cruise, Blind spot camera, Power rear view mirrors. Excellent engine.
Comfort
10
Performance
10
Fuel Economy
10
Interior Design
10
Exterior Styling
10
Reliability
10
Recall Information
* Data provided by Transport Canada
Recall number
Recall date
System affected
Model year(s) affected
Recall number
2024-059
Recall date
2024-02-01
System affected
Airbag
Model year(s) affected
2020 2021
Manufacturer Recall Number:
Units Affected:
66,846
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the weight sensor for the front passenger seat may not have been manufactured properly. As a result, the passenger-front airbag and knee airbag could deploy in a crash that doesn't require them to.
Note: If the weight sensor fails, the SRS warning light would turn on in the instrument panel.
Safety Risk:
An airbag system that doesn't work properly could increase the risk of injury in a crash.
Corrective Actions:
Honda will notify owners by mail and advise you to take your vehicle to a dealership for an inspection if the SRS warning light is on. If the SRS warning light is on due to a faulty weight sensor, the weight sensor will be replaced. When repair parts are available, Honda will send you a second letter. They will advise you to take your vehicle to a dealership to replace the passenger-front seat weight sensor.
Recall number
2023-679
Recall date
2023-12-18
System affected
Fuel Supply
Model year(s) affected
2017 2018 2019 2020
Manufacturer Recall Number:
Units Affected:
298,262
Notification Type:
Safety Mfr
Issue:
This recall is for low-pressure fuel pumps installed on certain vehicles or sold at dealerships as a replacement part.
On certain vehicles, the low-pressure fuel pump could fail. If this happens, the engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving.
Note: This is an expansion of Transport Canada recall nos. 2020-236 and 2021-182.
Safety Risk:
A sudden loss of engine power could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and advise you to take your vehicle to a dealership to replace the fuel pump motor.
Recall number
2023-603
Recall date
2023-11-08
System affected
Engine
Model year(s) affected
2016 2018
Manufacturer Recall Number:
HP67 / AM28
Units Affected:
29,601
Notification Type:
Safety Mfr
Issue:
On certain vehicles equipped with a V6 engine, the connecting rod bearings could wear prematurely and become damaged.
Safety Risk:
An engine failure could cause a sudden loss of power and/or increase the risk of a vehicle fire. Both issues could increase the risk of a crash or injury.
Corrective actions:
Honda will notify owners by mail and advise you to take your vehicle to a dealership to inspect the engine. If damage is found, the dealer will replace the necessary parts.
Recall number
2023-593
Recall date
2023-11-02
System affected
Steering
Model year(s) affected
2023
Manufacturer Recall Number:
HP65
Units Affected:
19
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the steering gearbox may not have been manufactured correctly. As a result, the steering rack could lock up while driving.
Safety Risk:
A sudden loss of steering control could create the risk of a crash.
Corrective Actions:
Honda will notify owners by mail and advise you to take your vehicle to a dealership to replace the steering gearbox.
Recall number
2023-365
Recall date
2023-06-29
System affected
Brakes
Model year(s) affected
2021 2022
Manufacturer Recall Number:
HP58 / HP59
Units Affected:
12,246
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the brake master cylinder could separate from the brake booster. If this happens, braking could be reduced or you could experience a complete loss of brakes.
Safety Risk:
Reduced braking or a loss of brakes can increase the risk of a crash.
Corrective Actions:
Honda will notify owners by mail and advise you to take your vehicle to a dealership to inspect the brake master cylinder and brake booster. The dealer will inspect for any missing nuts and damaged brake booster parts and replace them as necessary.
Recall number
2023-350
Recall date
2023-06-15
System affected
Visual System
Model year(s) affected
2019 2020 2021 2022
Manufacturer Recall Number:
HP56 / HP57
Units Affected:
88,228
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the terminals on the coaxial cable for the audio display unit may not have been manufactured correctly. As a result, the audio display unit could lose its connection, and the rearview camera image may not display when the transmission is shifted into reverse gear.
Safety Risk:
A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Honda will notify owners by mail and advise you to take your vehicle to a dealership to replace the media oriented systems transport (MOST) cable harness, and install a cover over the audio display unit connector.
Recall number
2023-136
Recall date
2023-03-16
System affected
Visual System
Model year(s) affected
2020 2021
Manufacturer Recall Number:
HP38
Units Affected:
12,916
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the side mirror glass may not be attached properly. As a result, the mirror glass could vibrate or fall off.
Safety Risk:
A missing mirror will reduce rear visibility and could increase the risk of a crash.
Corrective Actions:
Honda will notify owners by mail. Due to a parts supply issue, Honda advises that you should only take your vehicle to a dealership if the mirror is loose, vibrating or has fully detached. Honda will send you a second notice when the replacement parts are available, and instruct you to take your vehicle to a dealership to replace the glass on both side mirrors.
Recall number
2021-725
Recall date
2021-11-25
System affected
Structure
Model year(s) affected
2016 2017 2018 2019
Manufacturer Recall Number:
P05
Units Affected:
51,325
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the hood latch striker could separate from the hood. If this happens, the hood could open while driving. Note: A loose or vibrating hood may be a warning that the hood latch is failing.
Safety Risk:
A hood that opens suddenly while driving could block the driver's view and increase the risk of a crash.
Corrective Actions:
Honda will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the hood latch striker. Depending on its condition, a striker support plate will be installed, or if necessary, the hood will be replaced.
Recall number
2021-182
Recall date
2021-03-26
System affected
Fuel Supply
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
80,176
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the low-pressure fuel pump could fail. If this happens, then engine may run rough or may not start and the check engine light may turn on. This could also result in a sudden loss of engine power while driving.
Note: This is an expansion of Transport Canada Recall No. 2020-236.
Safety Risk:
A sudden loss of engine power could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct you to take your vehicle to a dealer to replace the fuel pump motor.
Recall number
2021-139
Recall date
2021-03-11
System affected
Tires
Model year(s) affected
2019 2020
Manufacturer Recall Number:
Units Affected:
122
Notification Type:
Safety Mfr
Issue:
Certain vehicles were built with tires that may have been cured too long. As a result, the sidewall could crack or the tread and belts could separate. This could lead to a sudden loss of air pressure and could cause a tire failure.
Note: This recall only affects certain Continental tires, with specific date codes and mold numbers.
Safety Risk:
A tire failure could cause a loss of control and increase the risk of a crash.
Corrective Actions:
Honda will notify the owners by mail and instruct them to take the vehicle to a dealer to inspect and replace the tires, if necessary.
Recall number
2020-560
Recall date
2020-11-20
System affected
Tires
Model year(s) affected
2021
Manufacturer Recall Number:
Units Affected:
1
Notification Type:
Safety Mfr
Issue:
One vehicle may have been built with tires that may have been cured too long. As a result, the sidewall could crack or the tread and belts could separate. This could lead to a sudden loss of air pressure and could cause a tire failure.
Note: This recall only affects vehicles equipped with certain Continental CrossContact LX Sport tires, with specific date codes and mold numbers.
Safety Risk:
A tire failure could cause a loss of control and increase the risk of a crash.
Corrective Actions:
As the vehicle was not sold, Honda has inspected it and determined that the tires were not affected by this problem.
Recall number
2020-346
Recall date
2020-07-28
System affected
Visual System
Model year(s) affected
2019 2020 2021
Manufacturer Recall Number:
Units Affected:
41,871
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, a software problem could cause a delay or prevent the rearview camera image from displaying. Canadian regulations require the rearview image to display within 2 seconds of shifting the transmission into reverse gear.
Safety Risk:
A rearview camera image that is delayed or that does not display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.
Corrective Actions:
Honda will notify owners by mail and include instructions on how to download and install a software update to correct this problem. Alternatively, an owner can take their vehicle to a dealer to have the software update installed.
Recall number
2020-344
Recall date
2020-07-28
System affected
Visual System
Model year(s) affected
2019 2020 2021
Manufacturer Recall Number:
Units Affected:
53,772
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, there is a programming error in the instrument panel control module. This could cause the instrument panel not display certain information, such as the vehicle speed, engine oil pressure, and gear selector position. This can also cause the rearview camera image not to display.
Safety Risk:
An instrument panel that does not work or a rearview camera image that does not display could increase the risk of a crash.
Corrective Actions:
Honda will notify owners by mail and instruct you to take your vehicle to a dealer to reprogram the instrument panel control module.
Recall number
2020-041
Recall date
2020-02-06
System affected
Label
Model year(s) affected
2020
Manufacturer Recall Number:
HO27
Units Affected:
596
Notification Type:
Compliance Mfr
Issue:
On certain vehicles, the information printed on the compliance label was not printed with permanent ink. As a result, the ink may be wiped away with a solvent. This could result in an operator not being able to see information about the correct vehicle loading. If this happens, the vehicle could be unintentionally overloaded.
Safety Risk:
An overloaded vehicle could increase the risk of a crash.
Corrective Actions:
Honda will notify owners by mail and instruct you to take your vehicle to a dealer to replace the compliance label.
Recall number
2019-547
Recall date
2019-10-31
System affected
Structure
Model year(s) affected
2019
Manufacturer Recall Number:
HO22
Units Affected:
1
Notification Type:
Safety Mfr
Issue:
On one vehicle, portions of the front frame may not be properly welded. Specifically, the left and right-side upper members may not have been completely welded to the unibody. This could affect the crash protection of the vehicle.
Safety Risk:
A vehicle with an improperly welded frame could create an increased risk of injury in a crash.
Corrective Actions:
Honda will notify the owner by mail and instruct them to take their vehicle to a dealer for an inspection. If the welds are found missing, Honda will repurchase the vehicle.
Recall number
2019-323
Recall date
2019-06-28
System affected
Airbag
Model year(s) affected
2003 2009 2015
Manufacturer Recall Number:
Units Affected:
222,662
Notification Type:
Safety Mfr
Issue:
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.
Note: This is a new recall campaign that includes vehicles that had an airbag inflator replaced under a previous recall or had a replacement airbag installed. The previous recall provided an interim (short-term) repair. Interim repair parts must be replaced with the final repair parts provided in this recall.
Safety Risk:
If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.
Corrective Action:
Owners will be notified by mail and instructed to take their vehicle to a dealer to replace the driver and/or passenger-front airbag inflator.
Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2019-179
Recall date
2019-04-11
System affected
Engine
Model year(s) affected
2019
Manufacturer Recall Number:
Units Affected:
9,834
Notification Type:
Safety Mfr
Issue:
On certain vehicles, the teeth on the timing belt may separate due to a manufacturing issue. This could result in an engine stall.
Safety Risk:
An engine stall could increase the risk of a crash.
Corrective Actions:
The company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect the lot number on the timing belt. If it is within the affected range, the belt will be replaced. Additionally, dealers will inspect the engine for internal damage.
Recall number
2019-117
Recall date
2019-03-07
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006 2007 2008
Manufacturer Recall Number:
Units Affected:
83,977
Notification Type:
Safety Mfr
Issue:
On certain vehicles, there could be a problem with the driver-front airbag inflator. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, pieces could be propelled toward the occupants. This could also cause damage to the airbag assembly and prevent it from inflating properly.
Note: This recall only affects certain vehicles that had a Takata airbag inflator installed during a previous airbag recall or collision repair.
Safety Risk:
In a crash where the airbag deploys, there could be an increased risk of injury.
Corrective Action:
The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have the driver-front airbag inflator replaced.
Recall number
2018-523
Recall date
2018-09-27
System affected
Airbag
Model year(s) affected
2010 2011 2012 2013 2014 2015
Manufacturer Recall Number:
Units Affected:
263,289
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator.
Recall number
2018-167
Recall date
2018-04-06
System affected
Seats And Restraints
Model year(s) affected
2018
Manufacturer Recall Number:
HN36 / AL44
Units Affected:
285
Notification Type:
Safety Mfr
Certain vehicles equipped with power driver and passenger seats may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 207 - Anchorage of Seats and CMVSS 210 – Seat Belt Anchorages. The front driver and/or passenger seats may have been assembled with improperly manufactured rivets to secure the seat slide rails to the forward seat feet. In the event of a crash, the rivets may break and allow the front seat(s) to separate from the seat feet, which would fail to meet the requirements of the standard(s), and could increase the risk of injury to the seated occupant. Correction: For Pilot models, dealers will replace the “H” frame (seat rail assembly), on both front seats, and for affected MDX models, dealers will replace the driver’s seat frame assembly.
Recall number
2018-001
Recall date
2018-01-10
System affected
Airbag
Model year(s) affected
2009
Manufacturer Recall Number:
Units Affected:
129,348
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. For the GL1800 model, dealers will replace the airbag module. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2017-009
Recall date
2017-01-10
System affected
Airbag
Model year(s) affected
2005 2006 2007 2008
Manufacturer Recall Number:
Units Affected:
428,641
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2016-278
Recall date
2016-06-03
System affected
Fuel Supply
Model year(s) affected
2016
Manufacturer Recall Number:
AL17 / HM77
Units Affected:
3
Notification Type:
Safety Mfr
On certain vehicles, the fuel tank may have received insufficient welds during manufacturing. Over time, the insufficient welds may separate and allow for fuel leakage. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the fuel tank.
Recall number
2016-249
Recall date
2016-05-24
System affected
Airbag
Model year(s) affected
2004
Manufacturer Recall Number:
Units Affected:
28,929
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2015-474
Recall date
2015-10-16
System affected
Brakes
Model year(s) affected
2016
Manufacturer Recall Number:
HM50
Units Affected:
2,920
Notification Type:
Compliance Mfr
Certain vehicles fail to comply with the requirements of Canada Motor Vehicle Safety Standard 135 - Brake Systems and Canada Motor Vehicle Safety Standard 126 - Electronic Stability Control Systems. Due to a software error in the instrument cluster, Vehicle Stability Assist (VSA), ABS and BRAKE warning lamps may not illuminate under certain conditions, which fails to meet the requirements of the standard. Failure of these lights to illuminate could increase the risk of a crash causing injury and/or damage to property. Note: The warning light will illuminate with next key cycle.
Correction: Dealers will update the instrument cluster software.
Recall number
2015-225
Recall date
2015-05-27
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006 2007 2008
Manufacturer Recall Number:
Units Affected:
704,770
Notification Type:
Safety Mfr
On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes special service campaign 2014567. Correction: Dealers will inspect/replace the driver’s frontal airbag inflator. All vehicles having received a replacement inflator as part of any previous driver's inflator campaign will have a replacement inflator installed. Note: Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact:
For Honda Owners: 1-877-445-7754
For Acura Owners: 1-877-445-9844
Recall number
2014-567
Recall date
2014-12-15
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006 2007 2008
Manufacturer Recall Number:
Units Affected:
704,770
Notification Type:
Superseded
Honda Canada is conducting a voluntary Safety Improvement Campaign concerning the driver's airbag inflator on certain vehicles equipped with Takata airbags. Honda will replace the driver's inflator on affected vehicles. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This special service campaign was replaced by recall 2015225. Please see recall 2015225 for more information:
Click here for more information
Recall number
2014-242
Recall date
2014-06-20
System affected
Airbag
Model year(s) affected
2003
Manufacturer Recall Number:
H-2-14
Units Affected:
168,968
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the passenger airbag inflator. Note: This recall is an expansion of recall 2013111. Honda Canada has created a special Airbag Inflator Hotline for immediate assistance. For more information, please contact:
For Honda Owners: 1-877-445-7754
For Acura Owners: 1-877-445-9844
Recall number
2013-078
Recall date
2013-03-13
System affected
Brakes
Model year(s) affected
2005
Manufacturer Recall Number:
AK62, AK63, HL69
Units Affected:
7,794
Notification Type:
Safety Mfr
Certain vehicles may experience a malfunction of the Vehicle Stability Assist (VSA) system, which could apply a small amount of brake force for a fraction of a second, even if the brake pedal has not been depressed. If the driver applies the brakes during a malfunction, the VSA system may employ the brake assist feature, which would increase braking force, exceeding the driver’s intended input. In either instance, an unexpected and unnecessary brake application could increase the risk of a crash causing property damage and/or personal injury. Correction: Dealers will install a partial wiring harness containing a capacitor for the VSA modulator.
Recall number
2013-018
Recall date
2013-01-18
System affected
Airbag
Model year(s) affected
2010 2011 2012 2013
Manufacturer Recall Number:
HL66
Units Affected:
44,762
Notification Type:
Safety Mfr
On certain vehicles, the airbag cover may not have been adequately secured to the driver’s airbag module. As a result, the airbag may deploy with an irregular shape, or the cover may detach during deployment. Failure of the airbag to deploy in the designed manner during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will inspect and, if necessary, replace the driver’s airbag module.
Recall number
2012-415
Recall date
2012-12-10
System affected
Powertrain
Model year(s) affected
2003 2004
Manufacturer Recall Number:
AK60, HL65
Units Affected:
52,441
Notification Type:
Safety TC
On certain vehicles, the ignition interlock blocking mechanism could become damaged if excessive force is applied to the ignition key. If this occurs, it may become possible for the driver to remove the ignition key when the gear selector is in a position other than the Park position. This could allow the vehicle to roll away, increasing the risk of a crash causing personal injury and/or damage to property. Correction: Dealers will install an updated ignition interlock lever and replace the ignition lock cylinder if necessary.
Recall number
2012-060
Recall date
2012-02-16
System affected
Fuel Supply
Model year(s) affected
2012
Manufacturer Recall Number:
AK50, HL43
Units Affected:
571
Notification Type:
Safety Mfr
On certain vehicles, the vent shut-float valve case (a component of the on-board vapour recovery system located inside the fuel tank) may have been incorrectly manufactured and could fail. This could allow fuel leakage from the tank which, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will inspect and, if necessary, replace the fuel tank assembly.
Recall number
2011-334
Recall date
2011-09-09
System affected
Seats And Restraints
Model year(s) affected
2009 2010 2011
Manufacturer Recall Number:
HL30
Units Affected:
9,954
Notification Type:
Safety Mfr
On certain vehicles, the driver and front passenger seatbelt webbing may have been incorrectly manufactured. As a result, the seatbelt may detach from the anchor webbing during a crash. Failure of the seatbelt to restrain the seat occupant as intended would increase the risk of personal injury during a crash. Correction: Dealers will inspect and, if necessary, replace the driver and front passenger seatbelts.
Recall number
2010-451
Recall date
2010-12-17
System affected
Suspension
Model year(s) affected
2011
Manufacturer Recall Number:
HL08
Units Affected:
442
Notification Type:
Safety Mfr
On certain vehicles, the front axle spindle nuts, as well as the bolts that secure the front suspension damper brackets to the steering knuckles, may not have been tightened properly during vehicle assembly. If the spindle nuts or the front damper bracket bolts loosen and fall out the front suspension may collapse, which could cause a loss of vehicle control. A loss of vehicle control could result in a crash causing property damage and/or personal injury. Correction: Dealers will inspect and replace the bolts that were not torqued to specifications.
Recall number
2004-143
Recall date
2004-04-23
System affected
Powertrain
Model year(s) affected
2003 2004
Manufacturer Recall Number:
AJ85, AJ86, HK18
Units Affected:
85,184
Notification Type:
Safety Mfr
Certain operating conditions can result in heat build-up between the countershaft and secondary shaft second gears in the automatic transmission, eventually leading to gear tooth chipping or, in very rare cases, gear breakage can occur. Gear failure could result in transmission lock-up. Correction: On vehicles with 24 000 kms or less, the dealer will update the transmission with a simple revision to the oil cooler return line to increase lubrication to second gear. On vehicles with more than 24 000 kms, the dealer will inspect the transmission to identify gears that have already experienced discoloration due to overheating. If discolouration exists, the transmission will be replaced. If discolouration is not present, the dealer will perform the revision to the oil cooler return line.
Select Another Vehicle