2010 Toyota Corolla

Canadian MSRP
$15,460 - $24,110
2010 Toyota Corolla

Key Specifications for 2010 Toyota Corolla

Fuel Economy 5.6 - 9.5 City/HWY combined
Horsepower 132 - 158 hp
Drivetrain Front-Wheel Drive
Engine Gasoline
Torque 128 - 162 ft-lb
Seats 5
 

Review & Compare:
2010 Toyota Corolla Trims

The 2010 Toyota Corolla has 7 trims. Below you will be able to review all the trims with the option to compare.
7 trims available
Select 1 more trim

Photos

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

View All Articles

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2021-723
Recall date
2021-11-24
System affected
Accessories
Model year(s) affected
1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2020 2021
Manufacturer Recall Number:
SRC XC8/XC9 / SRC RC8/RC9 / SRC RD1/RD2
Units Affected:
51,373
Notification Type:
Safety Mfr
Issue: This recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships. On certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt. Note: This recall only affects the following block heater/cord part numbers: C014003034 PK5A408J09 PU14000904 C014003151 PK5A408J13 PU14000905 C014000885 PK5A489J11 PU14000907 C014000888 PK5A489J22 PU14000909 C014000907 PK5A410H00 PU14000911 C014100904 PU14000900 PU14000913 C014100907 PU14000901 PU14003571 C014100911 PU14000902 PK5A408J05 PU14000903 Safety Risk: Engine block heater wiring that overheats or melts could create the risk of a fire. Corrective Actions: Toyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.
Recall number
2019-008
Recall date
2019-01-09
System affected
Airbag
Model year(s) affected
2010 2011 2012 2013
Manufacturer Recall Number:
SRC R75 / SRC R76
Units Affected:
376,282
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2015-493
Recall date
2015-10-21
System affected
Electrical
Model year(s) affected
2009 2010
Manufacturer Recall Number:
SRC R10
Units Affected:
315,091
Notification Type:
Safety Mfr
On certain vehicles, inconsistent application of grease during the manufacturing process could cause the driver's side power window master switch to stick or become inoperative due to electrical contact point wear. This could cause debris to accumulate between the contact points, potentially resulting in an electrical short circuit. If a short circuit occurs, the switch assembly may overheat, produce smoke, melt and/or potentially lead to a fire causing injury and/or property damage. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary. Note: This is an expansion of recall 2012-338.
Recall number
2014-124
Recall date
2014-04-09
System affected
Airbag
Model year(s) affected
2009 2010
Manufacturer Recall Number:
SSC234
Units Affected:
344,870
Notification Type:
Safety TC
On certain vehicles, electrical circuitry in the steering wheel assembly may become damaged. As a result, the driver's airbag may not function as intended, causing the instrument panel airbag warning lamp to illuminate. Failure of the driver's airbag to deploy during a crash (where deployment is warranted) could increase the risk of injury to the seat occupant. Correction: Dealers will replace the spiral cable assembly.
Recall number
2013-317
Recall date
2013-09-20
System affected
Structure
Model year(s) affected
2009 2010
Manufacturer Recall Number:
Units Affected:
144,744
Notification Type:
Safety TC
On certain vehicles, the trunk lid may begin to close after it has been opened. Contributing factors may include the trunk lid being in the partially open position, windy conditions, the vehicle being parked on an incline, or weight (such as snow or ice) acting on the trunk lid. As a result, interaction could occur between a person and the trunk lid, which could lead to minor injury. Correction: Owners who are dissatisfied with the performance of their vehicle’s trunk lid may have the trunk springs replaced under special warranty coverage.
Recall number
2010-012
Recall date
2010-01-22
System affected
Other
Model year(s) affected
2009 2010
Manufacturer Recall Number:
010
Units Affected:
273,050
Notification Type:
Safety Mfr
On certain vehicles, accelerator pedal movement may become rough, slow to return, or the pedal may stick in a depressed position. This could result in a loss of throttle control and a vehicle crash, causing property damage, personal injury or death. Correction: Dealers will install a steel reinforcement bar to the accelerator pedal assembly. With this reinforcement in place, the excess friction that can cause the pedal to stick is eliminated.
Recall number
2009-290
Recall date
2009-10-07
System affected
Other
Model year(s) affected
2009 2010
Manufacturer Recall Number:
011, 014, 030, 093, 083, 041, 084, 086, 081, 088
Units Affected:
437,445
Notification Type:
Safety TC
On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: Dealers will reconfigure the shape of the accelerator pedal. Certain models will also have the shape of the floor underneath the accelerator pedal modified and/or a brake override system installed.
Recall number
2009-251
Recall date
2009-08-26
System affected
Brakes
Model year(s) affected
2009 2010
Manufacturer Recall Number:
920
Units Affected:
103,932
Notification Type:
Safety TC
On certain vehicles, when driven in extremely low ambient temperatures, the intake manifold suction port for the brake vacuum can become blocked due to the freezing of condensation emanating from Positive Crankcase Ventilation (PCV). Should the suction port become blocked, vacuum assist to the brakes would be insufficient and the increased pedal pressure required could lead to an increase in vehicle stopping distance. Extended stopping distances may result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will install a newly designed intake air connector which will relocate the brake system vacuum port.
Recall number
2009-248
Recall date
2009-08-19
System affected
Label
Model year(s) affected
2010
Manufacturer Recall Number:
919
Units Affected:
1,157
Notification Type:
Compliance Mfr
Certain vehicles fail to comply with the requirements of CMVSS 208 - Occupant Restraint Systems in Frontal Impact. The driver's side airbag caution label can separate from the sun visor, whereas the Standard requires that the label be permanently affixed. Correction: Dealers will inspect and, if necessary, replace the driver's side sun visor.

Similar Vehicles

Select Another Vehicle
Search now