2001 BMW X5

Canadian MSRP
$58,700 - $68,700
2001 BMW X5

Key Specifications for 2001 BMW X5

Fuel Economy N/A
Horsepower 225 - 282 hp
Drivetrain All-Wheel Drive
Engine Gasoline
Torque 214 - 324 ft-lb
Seats 5

Review & Compare:
2001 BMW X5 Trims

The 2001 BMW X5 has 2 trims. Below you will be able to review all the trims with the option to compare.
2 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

View All Articles

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2019-020
Recall date
2019-01-15
System affected
Airbag
Model year(s) affected
2001 2002 2003 2004
Manufacturer Recall Number:
Units Affected:
10,135
Notification Type:
Safety Mfr
Issue: Some vehicles may contain a replacement sport steering wheel with a Takata driver-front air bag module. Certain conditions, including long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: The company will notify owners by mail. Owners will be instructed to take their vehicle to a dealer to have an inspection performed. If a Takata airbag inflator is found, then the driver-front airbag module will be replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.
Recall number
2017-034
Recall date
2017-01-20
System affected
Airbag
Model year(s) affected
2001 2002 2003
Manufacturer Recall Number:
Units Affected:
15,415
Notification Type:
Safety Mfr
On certain vehicles that had the driver's side frontal airbag replaced in the past, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the driver's side frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will inspect the driver's side frontal airbag module, and will replace it, if necessary. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Recall number
2012-129
Recall date
2012-04-12
System affected
Label
Model year(s) affected
2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013
Manufacturer Recall Number:
Units Affected:
67,771
Notification Type:
Inconsequential
Certain vehicles fail to conform to Canada Motor Vehicle Safety Standards. Specifically, the compliance label does not indicate the wheel rim size, as required by the Standard. Correction: Due to the inconsequential nature of this non-compliance, no action will be taken.
Recall number
2003-001
Recall date
2003-01-08
System affected
Brakes
Model year(s) affected
2000 2001 2002
Manufacturer Recall Number:
RC2003-001
Units Affected:
6,156
Notification Type:
Safety Mfr
On certain vehicles, the grommet holding the brake line to the front struts may slip out of its bracket. Consequently, the brake hose attached to the brake line may come in contact with the tire and be subject to wear and abrasion. This could cause some brake fluid leakage which would eventually illuminate the brake warning indicator light. If a loss of front brake performance occurs, the rear brake circuit will still be functional, and will be able to slow and stop the vehicle. Correction: Dealer will install an additional retaining clip in order to further secure the line and grommet to the strut.
Recall number
2002-138
Recall date
2002-07-22
System affected
Brakes
Model year(s) affected
2000 2001
Manufacturer Recall Number:
RC2002-138
Units Affected:
2,638
Notification Type:
Safety Mfr
On certain passenger vehicles the brake pedal arm pivot shaft could loosen from its support bracket. Eventually, the brake pedal arm could detach from the bracket, rendering the braking system ineffective, increasing the risk of a crash. Correction: Dealers will check the brake pedal arm pivot shaft for proper seating in its support bracket. In addition, a pin will be installed to secure the shaft to the bracket.
Recall number
2001-182
Recall date
2001-07-09
System affected
Engine
Model year(s) affected
2001
Manufacturer Recall Number:
RC2001-182
Units Affected:
4,812
Notification Type:
Safety Mfr
Certain passenger vehicles. The engine auxiliary/cooling fan operation, including variable speed, is electronically controlled. Failure of the fan motor can cause the electrical circuitry of the fan control unit to overload and fail, causing the fan to stop operating. If this were to occur, engine overheating and subsequent engine damage could result. In addition, it is possible for the failure of the electrical circuitry to cause a fire in the fan control unit located in the front of the engine compartment. Correction: Dealers will replace the fan.
Recall number
2001-039
Recall date
2001-02-21
System affected
Steering
Model year(s) affected
2001
Manufacturer Recall Number:
RC2001-039
Units Affected:
870
Notification Type:
Safety Mfr
On certain vehicles, the lower end of the upper steering spindle may not have been inserted completely into the aluminum u-joint assembly (coupling). In such a case, the fastening bolt used to secure the connection may not completely engage the spindle within the coupling. This would make it possible for the spindle to disconnect from the coupling, resulting in loss of steering capability and a possible crash. Correction: Spindle will be inspected for proper insertion into the coupling. If necessary, the spindle will be fully inserted and the fastening bolt replaced.
Recall number
2000-279
Recall date
2000-11-28
System affected
Seats And Restraints
Model year(s) affected
2001
Manufacturer Recall Number:
RC2000-279
Units Affected:
62
Notification Type:
Safety Mfr
On certain vehicles, the safety belt lower outboard anchorage bolt on the driver's and front passenger's seats may not have been secured properly. In the event of a crash, the safety belt system might not be able to provide its maximum restraint function. Correction: Dealers will inspect the bolts and correct the torque if necessary.
Recall number
2000-277
Recall date
2000-11-28
System affected
Steering
Model year(s) affected
2001
Manufacturer Recall Number:
Units Affected:
83
Notification Type:
Safety Mfr
On certain vehicles, the nut that secures the axial joint of the left steering tie rod to the steering gear box may not have been tightened securely. This could lead to loosening of the nut and, initially to steering wheel play and/or misalignment, as well as noise from the steering linkage. If vehicle operation continues, the tie rod could disconnect from the steering gear box. If this were to occur, loss of steering control could result. Correction: Dealers will inspect and re-torque the nut securing the axial joint of the left steering tie rod. If the torque of the nut is found to be loose, the right nut will also be checked and corrected if necessary, and a front wheel alignment will be performed.

Similar Vehicles

Select Another Vehicle
Search now