2009 Pontiac Vibe

Canadian MSRP
$16,830 - $26,070
2009 Pontiac Vibe

Key Specifications for 2009 Pontiac Vibe

Fuel Economy 6.2 - 10.3 City/HWY combined
Horsepower 132 - 158 hp
Drivetrain Front-Wheel Drive, All-Wheel Drive
Engine Gasoline
Torque 128 - 162 ft-lb
Seats 5
 

Review & Compare:
2009 Pontiac Vibe Trims

The 2009 Pontiac Vibe has 3 trims. Below you will be able to review all the trims with the option to compare.
3 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2018-016
Recall date
2018-01-09
System affected
Airbag
Model year(s) affected
2009 2010
Manufacturer Recall Number:
17476
Units Affected:
21,632
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Depending on the vehicle model, dealers will either replace the passenger frontal airbag inflator, or replace the airbag assembly. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Additional note: The 2010 model year vehicles involved in this campaign have been identified as having once being registered in “Zone B” in the USA.
Recall number
2017-134
Recall date
2017-03-10
System affected
Airbag
Model year(s) affected
2009 2010
Manufacturer Recall Number:
17078
Units Affected:
150
Notification Type:
Superseded
General Motors Canada is conducting a voluntary Safety Improvement Program involving the passenger airbag inflator in certain vehicles that were originally sold or ever registered in certain high humidity areas of the United States equipped with Takata airbags. General Motors will replace the passenger inflator on affected vehicles, depending on the vehicle involved. Owners who believe their vehicles may have been originally purchased or registered in the states of New Jersey, Delaware, District of Columbia, Maryland, Pennsylvania, Ohio, Indiana, Illinois, Virginia, West Virginia, Kentucky, Missouri, Nebraska, Kansas, Oklahoma, Arkansas, Tennessee, North Carolina, Nevada, Arizona, New Mexico, California, Texas, Louisiana, Mississippi, Alabama, Georgia, South Carolina, Florida, Hawaii, Puerto Rico or the U.S. Virgin Islands should contact a General Motors dealer. This action is not being conducted under the requirements of the Motor Vehicle Safety Act. Note: This Safety Improvement Campaign is superseded by recall 2018-016 (GM Recall 17476). Please see recall 2018016 for more information.
Recall number
2015-496
Recall date
2015-10-22
System affected
Electrical
Model year(s) affected
2009 2010
Manufacturer Recall Number:
15791
Units Affected:
8,751
Notification Type:
Safety Mfr
On certain vehicles, inconsistent application of grease during the manufacturing process could cause the driver's side power window master switch to stick or become inoperative due to electrical contact point wear. This could cause debris to accumulate between the contact points, potentially resulting in an electrical short circuit. If a short circuit occurs, the switch assembly may overheat, produce smoke, melt and/or potentially lead to a fire causing injury and/or property damage. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary. Note: This is an expansion of recall 2012-342.
Recall number
2014-145
Recall date
2014-04-22
System affected
Airbag
Model year(s) affected
2009 2010
Manufacturer Recall Number:
14139
Units Affected:
26,690
Notification Type:
Recalls Audit
On certain vehicles, electrical circuitry in the steering wheel assembly may become damaged. As a result, the driver's airbag may not function as intended, causing the instrument panel airbag warning lamp to illuminate. Failure of the driver's airbag to deploy during a crash (where deployment is warranted) could increase the risk of injury to the seat occupant. Correction: Dealers will replace the spiral cable assembly.
Recall number
2012-342
Recall date
2012-10-10
System affected
Electrical
Model year(s) affected
2009
Manufacturer Recall Number:
12071
Units Affected:
16,724
Notification Type:
Safety Mfr
On certain vehicles, due to improperly applied grease, the driver's side power window master switch could stick or become inoperative. If attempts are made to lubricate the switch, the switch assembly could overheat and melt. A melting switch may produce smoke and potentially lead to a fire causing property damage and/or personal injury. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary.
Recall number
2010-034
Recall date
2010-02-09
System affected
Other
Model year(s) affected
2009 2010
Manufacturer Recall Number:
10038
Units Affected:
28,488
Notification Type:
Safety Mfr
On certain vehicles, the accelerator pedal may become stuck in the wide open position due to an unsecured or incompatible driver's floor mat. A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death. Correction: Owners will be notified by first class mail to remove any unsecured driver's floor mat until further notice by the manufacturer.
Recall number
2010-015
Recall date
2010-01-22
System affected
Engine
Model year(s) affected
2009 2010
Manufacturer Recall Number:
10018
Units Affected:
28,488
Notification Type:
Safety Mfr
On certain vehicles the accelerator pedal movement may become rough, slow to return, or stick in a depressed position. This problem is caused by either wear or high humidity and could result in a loss of control leading to a vehicle crash causing property damage, personal injury or death. Correction: Dealers will install a steel reinforcement bar to the accelerator pedal assembly. With this reinforcement in place, the excess friction that can cause the pedal to stick is eliminated.
Recall number
2009-252
Recall date
2009-08-27
System affected
Brakes
Model year(s) affected
2009 2010
Manufacturer Recall Number:
09199
Units Affected:
15,948
Notification Type:
Safety TC
On certain vehicles, when driven in extremely low ambient temperatures, the intake manifold suction port for the brake vacuum can become blocked due to the freezing of condensation emanating from Positive Crankcase Ventilation (PCV). Should the suction port become blocked, vacuum assist to the brakes would be insufficient and the increased pedal pressure required could lead to an increase in vehicle stopping distance. Extended stopping distances may result in a vehicle crash causing property damage, personal injury or death. Correction: Dealers will install a newly designed intake air connector which will relocate the brake system vacuum port.

Similar Vehicles

Select Another Vehicle
Search now