2003 Toyota Tundra

Canadian MSRP
$23,520 - $41,395
2003 Toyota Tundra

Key Specifications for 2003 Toyota Tundra

Fuel Economy 11.2 - 16.7 City/HWY combined
Horsepower 190 - 245 hp
Drivetrain Rear-Wheel Drive, Four-Wheel Drive
Engine Gasoline
Torque 220 - 315 ft-lb
Seats 3 - 6

Review & Compare:
2003 Toyota Tundra Trims

The 2003 Toyota Tundra has 5 trims. Below you will be able to review all the trims with the option to compare.
5 trims available
Select 1 more trim

Photos

No content available

AutoTrader Review

N/A

This vehicle has not yet been reviewed

Reviews and News

View All Articles

Recall Information

Recall number
Recall date
System affected
Model year(s) affected
Recall number
2019-523
Recall date
2019-10-17
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006
Manufacturer Recall Number:
SRC R90 / SRC R91
Units Affected:
37,591
Notification Type:
Safety Mfr
Issue: On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function. Safety Risk: If the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury. Corrective Action: Owners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag inflator or airbag module replaced. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected. Additional Note: Vehicles may have had the original front passenger airbag inflator replaced as a “like-for-like” replacement under recall 2016-103 (Toyota Recall #'s SRC 241 & SRC 242) as a temporary remedy while evaluating a permanent remedy. These vehicles will receive the permanent remedy passenger airbag assembly under this recall.
Recall number
2018-699
Recall date
2018-12-12
System affected
Airbag
Model year(s) affected
2003
Manufacturer Recall Number:
SRC R69 & SRC R71
Units Affected:
5,369
Notification Type:
Safety Mfr
On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator or airbag assembly. Note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected. Vehicles may have had the original front passenger airbag inflator replaced as a “like-for-like” replacement under recall 2013-133 (Toyota Recall #'s SSC 193/241 & SSC 194/242) as a temporary remedy while evaluating a permanent remedy. These vehicles will receive the permanent remedy passenger airbag assembly under this recall.
Recall number
2016-103
Recall date
2016-03-02
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006
Manufacturer Recall Number:
SRC241 & SRC242
Units Affected:
400,124
Notification Type:
Safety Mfr
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall supersedes recalls 2013113, 2014224, 2015197 and 2015269. Correction: All vehicles having not received a replacement inflator as part of the previous recall will now have a replacement inflator installed by dealers. For Matrix model vehicles, dealers may replace the front passenger airbag assembly with one equipped with a newly specified inflator.
Recall number
2015-269
Recall date
2015-06-17
System affected
Airbag
Model year(s) affected
2003 2004 2005 2006
Manufacturer Recall Number:
SSC241 & SSC242
Units Affected:
366,860
Notification Type:
Superseded
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. Click here for more information
Recall number
2015-197
Recall date
2015-05-13
System affected
Airbag
Model year(s) affected
2003 2004
Manufacturer Recall Number:
SSC 241
Units Affected:
4,407
Notification Type:
Superseded
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. Click here for more information
Recall number
2014-224
Recall date
2014-06-12
System affected
Airbag
Model year(s) affected
2003 2004
Manufacturer Recall Number:
SSC 241/242
Units Affected:
107,339
Notification Type:
Superseded
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. Click here for more information
Recall number
2013-113
Recall date
2013-04-11
System affected
Airbag
Model year(s) affected
2003 2004
Manufacturer Recall Number:
193-194
Units Affected:
75,000
Notification Type:
Superseded
On certain vehicles, the passenger (frontal) airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the passenger airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Note: This recall is superseded by recall 2016103. Please see recall 2016103 for more information. Click here for more information
Recall number
2009-329
Recall date
2009-11-17
System affected
Structure
Model year(s) affected
2000 2001 2002 2003
Manufacturer Recall Number:
924 / 186
Units Affected:
9,722
Notification Type:
Safety Mfr
On certain vehicles operated in areas of heavy road salt usage, excessive corrosion of the rear cross member may cause separation of the spare tire stowed under the truck bed. Corrosion of the rear cross member may also affect the functionality of the rear brake line at the proportioning valve. A spare tire that separates during vehicle usage could impact nearby persons or objects resulting in personal injury and/or vehicle and property damage. Correction: Dealers will inspect the rear cross member and surrounding components and, depending on the amount of corrosion detected, either apply a corrosion-resistant compound or replace the cross member assembly.
Recall number
2005-151
Recall date
2005-05-18
System affected
Suspension
Model year(s) affected
2002 2003 2004
Manufacturer Recall Number:
511
Units Affected:
14,341
Notification Type:
Safety Mfr
On certain vehicles, a manufacturing issue with the front lower ball joint could result in premature wear. If the vehicle is operated for an extended period of time in this condition, the ball joint may eventually experience excessive wear and looseness, resulting in increased steering effort, reduced vehicle self-centering and noise in the front suspension. In extreme cases, when the driver continues to operate the vehicle in this condition, the lower ball joint may separate from the knuckle causing a loss of vehicle steering control. Correction: Dealers will inspect and, if necessary, replace the front lower ball joints.

Similar Vehicles

Select Another Vehicle
Search now